UNITED TRACKS AUTO CLUB
H.O. SCALE SLOT CAR RACES UTAC homepage
LATE MODEL STOCK CAR DIVISION - LifeLike T-Chassis, SG+, Tomy SRT, X2. Body must be a stock American made Late Model sedan of the current year or 4 previous years. The year of the body may be moved up each year if there are no major changes to that particular model. Any plastic gear setup ok. Plating ok.
Stock arm and Magnets.
INDY - SG+, SRT, X2, LifeLike Original Chassis. Stock Indy type slot car body. Stock arm. Stock magnets. Any plastic gear setup ok. Plating ok but SRT must use stock brushes and brush holders.
LATE MODEL SPORTSMAN - SG+,SRT,Tomy Turbo. Pick up shoe plating only. Stock gear ratio must be plastic. Stock arm Stock magnets. Stock American made Sedans or Camaro, Mustang, Firebird, Capri and Ford Escort, from1955 to1985 designed to carry 4 or more passengers.
(not the afx '71 camaro)
LATE MODEL CHALLENGE - TYCO 440x2, LifeLike Original Chassis, Tomy Turbo w/short traction magnet.
Plating ok but Tomy must use use stock brushes and brush holders, Any plastic gearing ok on Road Course, 7t or 8t pinion and stock crown gear on Ovals.. Stock arm, Stock magnets. Tyco X2 can use any type of pickup shoe springs. Stock American made sedan and Camaro, Mustang, Firebird from 1980 to current year designed to carry 4 or more passengers.
STREET MODIFIEDS- AFX Magna Traction, Auto World X Traction chassis. No lower than 5.5 ohm arm, must be original Aurora or AW arm, unbalanced. Stock or BSRT zapped magnets ok. Plating ok. Stock gear ratios crown must be plastic. Body must be street legal, no trucks or convertibles
SPORTSMAN - TJET,Johnny Lightning Tjet500 chassis. No lower than 5.5 ohm Aurora arm unbalanced, yello and blue super II magnets ok. Plating ok. TJet may use 12t drive pinion. American made Sedans, Camaros, Firebird, Mustangs, Willys. 1940s to early 1970s t jet type bodies designed to carry 4 or more passengers. Bodies must be Aurora, JL/AW, MEV, or Model Motoring. No convertibles, corvettes, foriegn cars,trucks ect. Cannot lower body, wheel wells may be slightly trimmed for tire clearence. Brass or weighted front end ok. Any silicon sponge or slip on tires ok. Any approved rims and wheels ok.
ALL CLASSES - No solder. Chassis must remain stock (except for wheels, tires, axles, added weight, and approved changes listed above). Sportman 1-1/4" wheel width limit, all others 1- 5/16". Bodies must remain stock. All bodies must be original manufactured slot car bodies availble or previously avaible at retail hobby shops or stores No lexan. Silicon sponge or slip on ok for all. Pick up shoe plating ok for all.
There are other rules and allowances in our official rulebook but this basic overview should cover 95% or so. . If you have any questions you can call Scott at 618 322 8287